Mono 200 W · Mono 350 W · Dual 350 W
For DC motor rotors. The Dual version controls two rotors or an Azimuth / Elevation installation.
Consoles and connections
Choose the correct version
A clear list replaces the old image. The exact rotor model determines the cable, connector, pinout and configuration.
Important: do not use a cable intended for another rotor, even if the connector appears identical.
Console list
DC or AC
Prices are shown only in the shop.
Mono 160 VA or Dual 300 VA
One AC control type, prepared as Mono or Dual and adapted to the selected rotor.
Supported rotors
AC and DC list
Model-specific cable, direct connection to the console and integrated network control.
TypeBrandRotorsConnection offered
ACYaesuG-450C / G-450A24 V AC · adapted cable
ACYaesuG-600 / G-600RC24 V AC split-phase · adapted cable
ACYaesuG-650C / G-650RC / G-1000C24 V AC · adapted cable
ACKenproKR-400 / KR-400RC / KR-600 / KR-600RC / KR-650XL24 V AC · adapted cable
DCProsistel12 VDC / 24 VDC rangesAvailable with 3-wire potentiometer feedback
DCYaesuG-450DC / G-450ADC / G-450CDCApprox. 20–24 V DC depending on version
DCYaesuG-800DXA / G-800DXC / G-1000DXA / G-1000DXC / G-2800DXA / G-2800DXCVariable 11–24 V DC
DCYaesu / KenproG-800S / SDX / KR-800S / SDX / G-1000S / SDX / KR-1000S / SDXEarlier-generation DC · adapted cable
Available connection types
- Rotor ↔ console: cable and connector adapted to the pinout
- Network: RJ45 LAN as standard or Wi-Fi
- Software: direct UDP and compatible protocols, with no mandatory third-party software
View compatible 12 / 24 V Prosistel models
3-wire potentiometer available
Prosistel 12 VDC / 24 VDC
Motor control, wiring, protection and feedback are supported on versions fitted with a 3-wire potentiometer.
Models with 3-wire potentiometer
PST-641DPST-2051DPST-2051D-PROPST-61DPST-61D-PRO
Models with 3-wire potentiometer
PST-71DPST-71D-PROPST-110D-PROPST-110D-PRO-HP
Please note: Prosistel versions with a 5-wire Hall sensor are not ready and are not currently offered.
Computer control
Radio software and networking
View protocols and software
PST Rotator and loggers
Compatibility with existing radio software is retained according to the protocol in use.
GS-232 / TCP
Network commands allow integration with compatible tools and radio loggers.
Direct UDP
The Dual model controls Azimuth / Elevation directly over UDP, with no mandatory third-party software.